소개 ABOUT
소개 Who we are
원재료 절약 / 100% 재활용 가능 / 스크류·실린더가 코팅되는 세정제Raw Material Saving / 100% Recyclable / Coating Cleaner for Screw and Cylinder
사용할수록 세정 원리를 터득하는 코팅 세정제입니다.-Coating cleaner that helps you grasp the cleaning principles more as you use it-
핵심 특징 Key Features
- 자동 Maintenance 가능Auto maintenance possible
- 분해 청소 대용 / 색상·흑점 제거 가능Substitute for disassembly cleaning; removes color and black spots
- 사출·압출·블로우·티다이·핫러너 세정 가능Suitable for injection, extrusion, blow, T-die and hot runner cleaning
- 모든 원재료 (열가소성 수지 400℃까지)All raw materials, up to 400℃ heat-resistant resin
- 10분 내 원료 색상 변경 도전 가능Color change possible within 10 minutes
경제성 · 효율 Cost Efficiency
- 2,500~3,500원/kg대 도전 가능Achievable at KRW 2,500–3,500 per kg
- 30만원대 투자로 원료 600~1,000kg 절감 도전 가능Save 600–1,000 kg of material with an investment of about KRW 300,000
- 전기세 40% 절감 도전 가능Up to 40% electricity cost savings
- 재활용 도전 가능Recycling achievable
수치 산정 기준(예시) Assumptions & measurement (example)
아래 수치는 라인 조건에 따라 달라질 수 있습니다. 상담 시 “조건(전제)–대표 케이스–측정 방식”으로 함께 확인하는 것을 권장합니다.Results can vary by line. For B2B clarity, we recommend confirming the assumptions, a representative case, and a simple measurement method together.
- 전제(예시): Assumptions (example):
- 주 2~4회 색상/원료 교체, 퍼징 농도 2%, 공정별 체류 5~15분2–4 color/material changeovers per week, 2% dosing, 5–15 min dwell (process-dependent)
- 대표 케이스(예시): Representative case (example):
- 기존 퍼징/분해 청소 대비, 교체 작업(퍼징·대기) 시간과 스크랩(재생 원료) 감소가 예측됩니다.Compared to conventional purging/disassembly cleaning, changeover time and purge scrap decrease on the same line
- 측정 방식(간단): How we measure (simple):
- 4주 단위로 ‘교체 1회당 스크랩 중량(kg)’ 및 ‘교체 단계 kWh’를 전/후 비교Over 4 weeks, compare “scrap weight per changeover (kg)” and “kWh during purge/idle” before vs. after
- 변수: Key variables:
- 수지 종류, 작업 온도, 스크류/실린더 상태, 오염 정도, 작업자 숙련도에 따라 결과 차이 발생resin type, temperatures, screw/cylinder condition, contamination level, and operator practice
